PCD反擊型錘式破碎機
丁寶勤 13906276368(技術)
電話：0513-88400999 傳真：0513-88400998 郵箱：[email protected]
本系列產品進料粒度大，采用結構、無鍵聯接、高鉻板錘、DuTe的反擊襯板，也可以調節排料粒度大小。該產品可以直接將粒度為600-1800mm的物料破碎至25或20mm以下。主要用于水泥、建材、礦山、化工等工業部門破碎脆性，中硬、含水性不大的物料，如石灰石等。物料的抗壓強度不超過140MPa。
This series of product is a new product after the optimized design of he company. It has a large feeding particle size.lt adopts unique structure, keyless connection,high chrome hammer.and unique impact liner.The particle size can be adjusted.The product can directly crush materials with a maximum particle size of 600-1800mm into the size less than 25 to 20mm.lt is mainly used for crushing brittle and medium-hard materials such as limestone with a low moisture content in the industries of cement, mining.chemical industry,etc.The compressive strength of materials shall not exceed 140Mpa.
產品特點Product features
■破碎比大
Large crushing ratio
■產品形狀呈立方體
Cubic shape
■進料粒度大
Large feeding size
■排料粒度大小可調，簡化破碎流程
Discharging particle size is adjustable,the crushing process is simplified
■錘頭壽命長，綜合運行成本降低
Hammerhead has a long life,and the comprehensive operating costs are reduced
■高效節能Energy-efficient
技術參數表I Technical Date
型號 | 轉子直徑×轉子寬度(mm) | 進料邊長上限(mm) | 出料粒度(mm) | 生產能力(t/h) | 功率(kw) | 重量 （t） |
PCD1609 | 1680×918 | 600 | 25-75 | 50-70 | 132 | 23900 |
PCD1612II | 1680×1250 | 850 | 25-75 | 100-140 | 220 | 29000 |
PCD2014 | 2000×1480 | 1200 | 25-75 | 150-250 | 355 | 49800 |
PCD2519 | 2530×1900 | 1500 | 25-75 | 250-450 | 710 | 94200 |
PCD2425 | 2740×2550 | 1500 | 25-75 | 700-800 | 1400 | 129900 |
PCD2428 | 2740× 2720 | 1850 | 25-75 | 800-900 | 1400 | 140000 |
上一頁：PX高效細碎機
下一頁：PCF單段錘式破碎機
